Table Height from Floor (In.) | 35-1/2 |
Motor Power (HP) | 5 |
Spindles Included | |
Table T-Slot (In.) | |
Spindle Size Under Nut (In.) | 3/4 (3 3/4), 1-1/4 (6) |
Maximum Diameter Cutter Above Table (In.) | |
Reversible | Yes |
Table Travel (In.) | N.A. |
Table Size (In.) | 40 x 30 |
Prewired Voltage (V.) | |
Dust Port Outside Diameter (In.) | 4 |
Spindle Speed (RPM) | 7,500, 10,000 |
Dust Collection Minimum CFM Required (CFM) | 600 |
Sliding Table Size (In.) | N.A. |
Electrical Controls | Yes |
Style (Type) | Shaper |
Motor Voltage (V.) | 230 |
Table Insert Opening Diameter (In.) | 2-35/64, 4-5/32, 5-3/4 |
Router Bit Collet Included | |
Motor Current (Amps) | |
Maximum Diameter Cutter Below Table (In.) | |
Spindle Tilt (Deg.) | N.A. |
Wiring Remarks | |
Recommended Circuit Size (Amps.) | |
Table Opening Diameter (In.) | 7-3/8 |
Fence Travel (Major and Minor) (In.) | N.A. |
Table Inserts (In.) | 2-35/64, 4-5/32, 5-3/4 |
Motor Phase | 1 |
Digital Readouts | Spindle Height |
Maximum Spindle Diameter (In.) | 1-1/4 |
Fence Size (L x H) (In.) | 18-3/4 x 4-7/8 |
| |
| |
| |
| |
| |
| |
| |
| |
| |