Maximum Rip Right of Blade (In.) | 30 |
Maximum Depth of Cut at 45 Degrees (In.) | 2-1/8 |
Table in Front of Saw Blade at Maximum Depth of Cut (In.) | |
Motor Voltage (V.) | 115/230 |
Table Size with Extensions (In.) | |
Blade Diameter (In.) | 10 |
Recommended Circuit Size (Amps.) | 20 |
Dust Collection Minimum CFM Required (CFM) | 350 |
Arbor Speed (RPM) | 4200 |
Maximum Diameter of Dado (In.) | 8 |
Prewired Voltage (V.) | 115 |
Motor Current (Amps) | 15/7.5 |
Table Size (In.) | 20 x 27 |
Maximum Width of Dado (In.) | 13/16 |
Table T-Slot (In.) | |
Maximum Depth of Cut (In.) | 3-1/8 |
Dust Port Outside Diameter (In.) | 4 |
Distance Between Sliding Table and Blade (In.) | |
Motor Power (HP) | 1-3/4 |
Miter Gauge Type | |
Wiring Remarks | |
Weight (Lbs.) | 346.8 |
Table Type | Cast Iron |
Style (Type) | Cabinet |
Arbor Diameter (In.) | 5/8 |
Maximum Rip Left of Blade (In.) | 12 |
Table Size with Full Extensions (In.) | |
Table Height from Floor (In.) | 34-1/4 |
Cast Iron Work Surface (In.) | 40 x 27 |
Total Work Surface (In.) | 57 x 27 |