Chisel Stroke (In.) | 10-3/4 |
Table Travel - Cross (In.) | 4 |
Chisel Stroke Maximum (In.) | |
Chisel Capacity (In.) | 1/4 - 1 |
Bushing Size (In.) | 5/8, 3/4, 1-1/8 |
Table Size Fully Extended (L x W) (In.) | |
Recommended Circuit Size (Amps.) | |
Head Travel (Left to Right) (In.) | |
Motor Voltage (V.) | 115, 230 |
Spindle Travel (In.) | |
Prewired Voltage (V.) | 115 |
Chuck Distance to Base (In.) | |
Table Tilt (Deg.) | 0 - 35 |
Maximum Work Piece Height (In.) | |
Chisel Center to Fence (In.) | 4 |
Drilling Capacity (In.) | |
Head Travel (Front to Back) (In.) | |
Spindle Speed (RPM) | 1,725 |
Spindle Distance to Base (In.) | |
Swing (In.) | |
Motor Power (HP) | 1 |
Column Diameter (In.) | |
Fence Size (L x H) (In.) | 4-1/2 x 20-1/4 |
Chuck Size (In.) | 1/2 |
Spindle Taper | N.A. |
Chuck Distance to Table (In.) | |
Spindle Distance to Table (Max.) (In.) | |
Base Size (In.) | 14 x 16 |
Motor Current (Amps) | 11, 5-1/2 |
Under Hold-Down (In.) | |
Table Travel - Longitudinal (In.) | 15-1/2 |
Stand Height (In.) | |
Table Size (L x W) (In.) | 7 x 20-1/4 |
Chisel Shank Capacity (In.) | 5/8, 3/4, 1-1/8 |
Wiring Remarks | |
Style (Type) | Tilt Table |