Navigate to the www.acetool.com homepage

Same-Day Shipping
On in stock items if order is placed before 3pm est

    Powermatic 1791284 TS29 TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic 1791284 TS29 Shaper, 7.5Hp 3Ph 230/460V

    Powermatic
    $0.00
    Items shipped directly from the manufacturer may be subject to a fee. Please call 877-783-8899 for details.
    Choose your options:
    JPW Drop Ship Policy
    Freight Policy(required):
    Product Code: JET-1791284
    Usually Ships in 7-10 Days
    Stock Status:  BackOrder

    Powermatic 1791284 Ts29 Shaper, 7.5Hp 3Ph 230/460V

    The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.
    • Sliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons
    • Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability
    • Large table with built-in slider with room for stock feeder
    • 7" vertical spindle travel allows stacked tooling
    • Spindle tilts negative 5 deg to positive 45 deg for increased versatility
    • Large diameter multiple table inserts accomodate virtually any size cutter
    • Five spindle speeds in forward and reverse with lighted indicator
    Table Travel (In.)49-1/4
    Digital Readouts
    Prewired Voltage (V.)230
    Wiring Remarks
    Electrical ControlsYes
    Spindle Size Under Nut (In.)3/4 (3-1/2), 1 (6-1/4), 1-1/4 (6-1/4)
    Motor Phase3
    Maximum Diameter Cutter Above Table (In.)12
    Router Bit Collet Included1/4, 1/2
    Dust Collection Minimum CFM Required (CFM)800
    Style (Type)Shaper
    Table Insert Opening Diameter (In.)
    Maximum Spindle Diameter (In.)1-1/4
    Spindles Included
    ReversibleYes
    Table Opening Diameter (In.)
    Maximum Diameter Cutter Below Table (In.)9
    Spindle Speed (RPM)3,000, 4,000, 6,000, 8,000, 10,000
    Table Size (In.)51-1/2 x 33-1/2
    Table T-Slot (In.)
    Spindle Travel (In.)7
    Table Inserts (In.)3: One Tilting, Two Straight
    Fence Size (L x H) (In.)46 x 5
    Table Height from Floor (In.)
    Motor Power (HP)7-1/2
    Fence Travel (Major and Minor) (In.)5-3/8, 3-5/8
    Motor Voltage (V.)230, 460
    Motor Current (Amps)
    Dust Port Outside Diameter (In.)5
    Recommended Circuit Size (Amps.)
    Sliding Table Size (In.)11-1/4 x 51-1/4

    STAY CONNECTED fbxig