Wiring Remarks | |
Arbor Diameter (In.) | 5/8 |
Maximum Rip Right of Blade (In.) | 50 |
Dust Port Outside Diameter (In.) | |
Weight (Lbs.) | |
Table in Front of Saw Blade at Maximum Depth of Cut (In.) | 11-1/4 |
Prewired Voltage (V.) | 230 |
Motor Phase | 3 |
Maximum Diameter of Dado (In.) | 8 |
Blade Diameter (In.) | 10 |
Table Size with Full Extensions (In.) | |
Motor Power (HP) | 5 |
Distance Between Sliding Table and Blade (In.) | |
Table Height from Floor (In.) | 34-1/2 |
Table Size (In.) | 22 x 30-1/2 |
Recommended Circuit Size (Amps.) | |
Arbor Speed (RPM) | 4,300 |
Table Type | Cast Iron |
Table Size with Extensions (In.) | 42 x 30-1/2 |
Miter Gauge Type | |
Motor Voltage (V.) | 230, 460 |
Dust Collection Minimum CFM Required (CFM) | 350 |
Maximum Depth of Cut (In.) | 3-1/8 |
Table T-Slot (In.) | |
Motor Current (Amps) | |
Maximum Rip Left of Blade (In.) | 13-1/2 |
Maximum Width of Dado (In.) | 13/16 |
Style (Type) | Cabinet |