Home > Dremel > Dremel Rotary Tools > Dremel Cordless Rotary Tool Attachments >

Dremel 220-01 Workstation

DREMEL 220-01 Workstation

List Price: $64.69
Ace Tool Price: $49.89
You save $14.80!
Google +1
Condition: New

Stock Status: Please Call For Availability
Product Code: DRE-220-01


DREMEL 220-01 Workstation.

Dremel Work Station functions as a Drill Press drilling at 90-degree vertical and in increments of 15-degrees up to 90-degrees horizontal, a Flex Shaft Tool Stand and a stationary tool holder.
  • The WorkStation is designed to drill a hole perpendicular to the surface of the material as well as at 15° intervals
  • The hole should be the same size as the drill bit you are using. For example, a 1/8" drill bit used in the Drill Press should produce a 1/8" hole
  • To ensure that, mount the Drill Press to a workbench so it can't move when you pull the lever to drill the hole and use some type of clamp to hold what you are drilling into
  • The Work Station can be rotated to the horizontal position to be used as a stationary holder for the rotary tool
  • When polishing or sanding, it is sometimes less fatiguing to control the work piece and keep the tool stationary. By locking the tool horizontally, you can easily do that.
  • Using the tools stand allows you to hang up your rotary tool and attach the 225 Flex Shaft to it
  • The Flex Shaft allows you to have increased control over the accessory you are using. The Flex shaft is particularly useful when performing precision or detailed work
  • In order for the Flex Shaft to perform properly, the rotary tool should be placed above the nose of the Flex Shaft when the Flex Shaft is in use
  • If the rotary tool is placed below the nose of the Flex Shaft, the cable in the Flex Shaft will disengage and the accessory will stop rotating.

  • Specification

  • 56 square inch base with inch and metric markings
  • 2 inch drilling depth
  • 90 rotation with detents every 15
  • 14 x 8 x 7.4 dimensions

  • Includes

  • Workstation
  • Instruction Manual