DeWalt DWH303DH Onboard Dust Extractor for 1 in. SDS Plus Hammers
This OSHA Table 1-compliant Dust Extractor works with the DCH273 1 in. Hammer. It features an OSHA 1926.1153-compliant Dust Box Assembly. With a filter cleaning mechanism and a HEPA filter, it removes 99.97% of airborne particles 0.3 microns or greater. The Dust Extractor has a powerful built in motor for increased suction during high performance drilling. The 2-second power-off delay ensures that dust extraction continues after the drill is switched off. It accomodates drill bit diameters up to 5/8 in. which allows users to drill overhead for 1/2 in. drop-ins.
Table 1-compliant dust management solution for 1 in. SDS Plus rotary hammers
2-second power off delay ensures dust extraction to continue after drill is switched off
Clear, durable dust box ensures users can see when dust box needs to be emptied
Built-in motor increases suction and high tool performance
Replaceable dust nozzle to quickly change to new nozzle
Drill up to 5/8 in. diameter, 4 in. useable length, 6 in. overall length bits
Fits into tight spaces on scissor lifts and between overhead pipes and duct work
Easily adjustable depth guage for accurate anchor drilling
Replaces D25303DH
Tool Height - 10.2 in
Tool Length - 13.6 in
Tool Width - 5 in
Tool Weight - 3.08 lbs
For Tool Type - SDS Plus Rotary Hammers
Carbide Drill Bit Capacity - 5/8 in. x 4 in. useable x 6 in. overall
OSHA Compliance - Table 1
Filter Cleaning Mechanism - true
HEPA Filter (99.97% Efficiency) - true
(1) DeWalt DWH303DH Onboard Dust Extractor for 1 in. SDS Plus Hammers