Navigate to the www.acetool.com homepage

Same-Day Shipping
On in stock items if order is placed before 3pm est

    Husqvarna 968411301 DM 230 Handheld Core Drill Motor

    Husqvarna 968411301 Dm 230 Handheld Core Drill Motor

    Husqvarna
    $0.00
    Items shipped directly from the manufacturer may be subject to a fee. Please call 877-783-8899 for details.
    • SKU# 968411301
    Product Code: HUS-968411301
    Usually Ships in 7-10 Days
    Stock Status:  BackOrder

    Husqvarna Equipment 968411301 DM 230 Handheld Core Drill Motor

    New, handheld drill motor with attractive design and functional ergonomics. Soft rear section and a larger contact area mean that it sits better against your body. The machine is modular, and therefore easy to maintain and repair.

    Specifications:
    • Elgard, when the machine is overloaded, the motor pulsates (rapid fluctuations in rpm). This occurs at a level just before the electronics cut the power to the motor.
    • Functional ergonomics make the Husqvarna drill motors easy and convenient to operate.
    • Softstart, an electronic current limiter, for softer starts. Full speed is reached about a second after the switch is turned on.
    • SmartStart, for drilling drill motor is equipped with it.
    • Water-cooled gearbox (patent pending), where the water passes through the blade spindle, extends life of gearbox and gaskets.
    • Standard attachment for the stand, and is mainly meant for wet drilling, but can be fitted with an adapter for dry drilling.
    • Buttons and controls are ergonomically designed and easy to reach.
    • Water hose and electric cable run parallel conveniently from the machine.
    • Thanks to electronic rpm control, the job can always be done with optimum power.


    Engine
    • Motor: 1 phase, electric
    • Voltage: 230 / 110 V
    • Amperage: 8 / 16 A
    • Power: 1850 W
    • Output RPM: 700 / 1700 / 3600 rpm
    • Output RPM at full load: 580 / 1400 / 2900 rpm
    • Power rating: 1100 W
    • Speeds: 3
    • Water coupling: G 1/4"
    Drill bit
    • Max drill bit diameter, handheld: 3 inch
    • Max drill bit diameter, stand: 6 inch
    • Mounting collar: 2.36 "
    • Spindle thread, outer: 1 1/4" 7 UNC
    • Spindle thread, inner: G 1/2" or 5/8" 11 UNC
    Dimensions
    • Weight: 15.6 lbs
    Sound and noise
    • Sound pressure: 90 dB(A)
    • Sound level: 94 dB(A)

    STAY CONNECTED fbxig