JET 723530K JWDS-1836 Drum Sander With Stand

• Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
• Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required
• Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position
• Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port
• Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage
• Precision-flattened reinforced steel conveyor bed
• Redesigned conveyor system pulls the workpiece through the sander instead of pushing
• One rotation of the top-position handwheel adjusts the drum height by 1/16"
• The relative depth scale on the handwheel allows the user to reset and measure the depth for every project
• Infinitely variable speed control of up to 10 feet per minute allows the user to choose the optimal feed rate
• Toolless abrasive take-up clips make changing abrasives quick and easy
• Snipe is virtually eliminated thanks to the adjustable tension rollers that apply downward pressure to the workpiece
• Separate feed and drum motors provide independent control, optimizing the performance of the sander
• Conveyor belt TRACKERS reduce the need for manual belt adjustments
• Integrated on/off switch and variable speed control knob are conveniently located
• Stand features a 20" x 37" footprint to increase stability and has a storage shelf and pre-drilled holes for casters
• Drum is easily removable
• Drum utilizes sealed and permanently lubricated ball bearings for longer life

• Drum Length (In.) - 18
• Number of Sanding Drums - 1
• Drum Speed (RPM) - 1,720
• Drum Diameter (In.) - 5
• Drum Bearing Diameter (In.) - 1
• Conveyor Motor - 43 in.-lbs. torque, direct drive, dc
• Conveyor Speed (FPM) - 0 - 10
• Maximum Board Thickness (In.) - 3
• Maximum Board Width (In.) - 36 (two passes)
• Minimum Board Length (In.) - 2-3/8
• Minimum Board Thickness (In.) - 1/32
• Dust Collection Minimum CFM Required (CFM) - 500
• Dust Port Outside Diameter (In.) - 4
• Motor Power (HP) - 1-3/4
• Motor Phase (PH) - 1
• Motor Voltage (V) - 115 only
• Motor Amps - 15
• Recommended Circuit Size (Amps.) - 20