JET 354051 J-2360, 30 in. 4HP Direct Drive Drill Press
$20,599.00
Jet 354051 J-2360, 30 Inch 4HP Direct Drive Drill Press
- Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection
- Speed and feed selectors are located on one side of the drill head for convence and ease of operation
- Oversized base is precision ground with T-slot for added versatility and stability
- Mechanical powerfeed clutch engagement
- Two-speed forward and reverse switch
- Automatic tool ejector
- Heavy-duty quill
- Low voltage controls
- Manual quill lock
- Coolant system
- Does NOT perform Tapping function
| Style (Type) | Direct Drive |
| Drills to Center of Circle (In.) | 30 |
| Drilling Capacity Cast Iron (In.) | 2-5/32 |
| Drilling Capacity Mild Steel (In.) | 2 |
| Column Diameter (In.) | 6-7/8 |
| Distance Column to Spindle (In.) | 15 |
| Range of Spindle Speeds (RPM) | 55, 98, 156, 198, 346, 456, 576, 822, 1,338 |
| Spindle Taper (In. x TPI) | MT-4 |
| Spindle Travel (In.) | 10 |
| Spindle Distance to Base (In.) | 50 |
| Spindle Distance to Table (Max.) (In.) | 30-1/2 |
| Table Size (L x W) (In.) | 22 x 19 |
| T-Slots Number and Size (In.) | 3 - 5/8 |
| Work Table Weight Capacity (Lbs.) | 400 |
| Base Dimensions (In.) | 53 x 30 |
| Base Slots Number & Size (In.) | 3 x 5/8 |
| Motor (HP) | 4 HP, 230/460V, 3Ph |
| Prewired (V.) | 230 |
| Overall Dimensions (L x W x H) (In.) | 53 x 30 x 108 |
| Weight (Lbs.) | 2,405 |
Recently Viewed