JET 414484 J-7040M-4, 10 in. x 16 in. Horizontal Mitering Bandsaw
$11,329.00
Jet 414484 J-7040M-4, 10 Inch x 16 Inch Horizontal Mitering Bandsaw 230/460V 3Ph
- Mitering head swivels to cut any angle 0 deg - 45 deg while the work piece remains secured
- Swing away control panel houses major saw controls
- Variable speed drive system allows the operator to easily fine tune the blade speed
- Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
- The blade rides on two load bearings mounted on a pivot shaft with the side bearings and carbide pads assisting in distributing the load equally
- Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
- Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath
- Cast Iron blade wheels
- Coolant system
- Adjustable material stop
- 1" Bi-Metal blade
| Cutting Capacity (W x D) (In.) | 10 x 16 |
| Round at 90 Degrees (In.) | 10 |
| Round at 45 Degrees (In.) | 8-1/2 |
| Rectangle at 90 Degrees (In.) | 10 x 14 and 2 x 16 |
| Rectangle at 45 Degrees (In.) | 8-1/2 x 9 |
| Vise Swivels (Deg.) | 45 deg |
| Head Movement (Deg.) | 45 deg |
| Blade Size (In.) | 1 x .035 x 135 |
| Blade Length (In.) | 135 |
| Blade Wheel Diameter (In.) | 14 |
| Blade Speed (SFPM) | 100 - 350 |
| Bed Height (In.) | 25-1/2 |
| Motor (HP) | 2 HP, 460, 3Ph |
| Drive | Variable Speed |
| Overall Dimensions (L x W x H) (In.) | 76 x 30 x 48 |
| Weight (Lbs.) | 924 |
Recently Viewed