Klein Tools S1684-74H Chicago Grip - Curved-Jaw Grip for EHS Cable
$478.81
Klein S1684-74H Chicago Grip - Curved-Jaw Grip for EHS Cable-Wire Pulling GripsChicago Grips - Curved-Jaw Grips for EHS Cable
Klein Tools S1684-74H Chicago Grip - Curved-Jaw Grip for EHS Cable Features:
- When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
- To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour.
- Available with hot-line latch and spring.
| Approx. Weight Each | 6.50 lbs. (2.9 kg) |
| Jaw Length | 5'' (127 mm) |
| Maximum Safe Load - lbs | 8000 lbs. (3629 kg) |
| Maximum Cable | .55'' |
| Minimum Cable | .218'' |
| Maximum Safe Load - kg | 3636 kg |
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
Recently Viewed