Klein Tools Non-Contact Voltage and GFCI Receptacle Premium Test Kit (Cat. No. NCVT1XTKIT) includes a Non-Contact Voltage Tester and a GFCI Receptacle Tester. The Non-contact Voltage Tester (Cat. No. NCVT1XT) detects voltage 70 to 1000V AC, is dustproof and waterproof with an IP67 rating, and has durable 9.8-Foot (3 m) drop protection. The GFCI Receptacle Tester (Cat. No. RT210) is designed to detect the most common wiring problems in standard and GFCI receptacles.
Voltage Tester provides non-contact detection of 70 to 1000V AC in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires
Durable tester is dustproof and waterproof with an IP67 rating and 9.8-Foot (3 m) drop protection
Volt Pen with high intensity, bright green LED indicates the tester is powered on
When voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound
CAT IV 1000V safety rating, low battery indicator, and easy access to battery compartment
GFCI Tester detects the most common wiring problems in standard and GFCI receptacles: open ground, reverse polarity, open hot, open neutral, hot/ground reversed
CAT II 300V safety rating, works on GFCI outlets, and confirms operation of the ground fault protective device
NCV Tester is not recommended for testing tamper-resistant outlets; use Cat. Nos. NCVT-2P or NCVT-3P in low voltage mode
Weight: NCVT1XT: 1.7 oz (47 g); RT210: 1.9 oz (54 g)
Special Features: NCVT1XT: Dustproof and Waterproof; Low Battery Indicator; Easy Access Battery Compartment; RT210: Convenient Chart on the Tester; Includes GFCI Tester
Type: NCVT1XT: Voltage Tester Pen; RT210: GFCI and Standard Receptacle Tester
