Navigate to the www.acetool.com homepage

Same-Day Shipping
On in stock items if order is placed before 3pm est

    You are here:Home > Brands > Kreg
    Kreg DK1100FE Single Spindle Electric Pocket Hole Machine

    Kreg DK1100FE Single Spindle Pocket Hole Machine

    Kreg
    $0.00
    • 1
    Product Code: KRE-DK1100FE
    Usually Ships in 7-10 Days
    Stock Status:  BackOrder

    Kreg DK1100FE Single Spindle Electric Pocket Hole Machine

    The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. Weve packed these machines with functional features that set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding- or bench-mounted to fit the way you build. Each DK1100 machine is built with industrial-grade motors that provide the power to run day after day " quickly, quietly, and reliably " in even the most high-production environments. Add real productivity and efficiency to your shop with the "Production Pocket-Hole Standard." This model works with any standard 20-amp 110-volt outlet and features a strong 11/2-HP electric motor, single-spindle simplicity, and a cycle time of less than one second.
    • Convenient Swing Stops - Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way.
    • Adjustable Fence - Adjustments couldnt be easier, as the fence adjusts from the top side of the machine to let you center a screw in 1/2" to 11/2" (12-38mm) thick material. The clamp hold-down also adjusts to allow materials up to 4" (101mm) thick to be drilled.
    • Quick Drill Bit Changes - Changing drill bits is a quick and simple process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds.
    • Long-Lasting Motors - The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are also designed to minimize stress on moving parts, greatly reducing the likelihood of failure.
    • Motor - 11/2"-HP, 110-volt, single-phase
    • Drill Bits - DKDB Drill Bit, 3/8" shank diameter, 3/16" pilot, 1/2"-long
    • CFM Rating - 1 CFM clamp cylinder (90 PSI/minute)
    • Cycle Time - 1 second
    • Material Clamping Capacity - 4"
    • Hole-Centering Capability - 1/2"- to 11/2"-thick
    • Weight - 176 lbs.
    • Dimensions - 50"H x 24"W x 24"D (40" table height)
    • Warranty - 5 Years
    (1) Kreg DK1100FE Single Spindle Electric Pocket Hole Machine

    STAY CONNECTED fbxig