| Distance Between Sliding Table and Blade (In.) | |
| Weight (Lbs.) | 393.8 |
| Prewired Voltage (V.) | 115 |
| Arbor Speed (RPM) | 4200 |
| Maximum Rip Left of Blade (In.) | 12 |
| Maximum Rip Right of Blade (In.) | 52 |
| Blade Diameter (In.) | 10 |
| Table Size with Extensions (In.) | |
| Maximum Depth of Cut (In.) | 3-1/8 |
| Table Type | Cast Iron |
| Table Size (In.) | 20 x 27 |
| Miter Gauge Type | |
| Recommended Circuit Size (Amps.) | 20 |
| Maximum Depth of Cut at 45 Degrees (In.) | 2-1/8 |
| Motor Phase | 1 |
| Motor Voltage (V.) | 115/230 |
| Style (Type) | Cabinet |
| Dust Port Outside Diameter (In.) | 4 |
| Wiring Remarks | |
| Table Size with Full Extensions (In.) | |
| Table in Front of Saw Blade at Maximum Depth of Cut (In.) | |
| Motor Power (HP) | 1-3/4 |
| Maximum Width of Dado (In.) | 13/16 |
| Maximum Diameter of Dado (In.) | 8 |
| Arbor Diameter (In.) | 5/8 |
| Table T-Slot (In.) | |
| Motor Current (Amps) | 15/7.5 |
| Table Height from Floor (In.) | 34-1/4 |
| Cast Iron Work Surface (In.) | 40 x 27 |
| Total Work Surface (In.) | 75-3/8 x 27 |
