You are here:Home > Brands > Powermatic Equipment > Powermatic Accessories

Powermatic 1791264K 719T 719 T Tilt Table Mortiser with Stand

Powermatic 1791264K 719T Mortiser, 1Hp 1Ph 115/230V

$0.00

Items shipped directly from the manufacturer may be subject to a fee. Please call 877-783-8899 for details.

Choose your options:

JPW Drop Ship Policy

Freight Policy(required):

I Agree

Product Code: JET-1791264K

Usually Ships in 7-10 Days

Stock Status: BackOrder

Quantity:

Powermatic 1791264K 719T Mortiser, 1Hp 1Ph 115/230V

The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35 deg. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpieces. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.

Sturdy cast iron construction with precision-machined column and table
Quick position table mounted swiveling vise clamp accommodates angled work pieces
Feed lever features size positions allowing for quick adjustments
Table and fence tilt from 0 to 35 deg for angled mortises
Gas cylinder controlled rack and pinion system for smooth head raising and lowering
Hinged chuck door allows easy access for quick bit changes
Quick adjust depth stop for uniform mortise depths
Provided 5/8", 3/4" and 1-1/8" bushings allow multiple chisel shank sizes
Handwheels control smooth linear and cross table motions
Adjustable work stop for repeat cuts

Chisel Stroke (In.)	10-3/4
Table Travel - Cross (In.)	4
Chisel Stroke Maximum (In.)
Chisel Capacity (In.)	1/4 - 1
Bushing Size (In.)	5/8, 3/4, 1-1/8
Table Size Fully Extended (L x W) (In.)
Recommended Circuit Size (Amps.)
Head Travel (Left to Right) (In.)
Motor Voltage (V.)	115, 230
Spindle Travel (In.)
Prewired Voltage (V.)	115
Chuck Distance to Base (In.)
Table Tilt (Deg.)	0 - 35
Maximum Work Piece Height (In.)
Chisel Center to Fence (In.)	4
Drilling Capacity (In.)
Head Travel (Front to Back) (In.)
Spindle Speed (RPM)	1,725
Spindle Distance to Base (In.)
Swing (In.)
Motor Power (HP)	1
Column Diameter (In.)
Fence Size (L x H) (In.)	4-1/2 x 20-1/4
Chuck Size (In.)	1/2
Spindle Taper	N.A.
Chuck Distance to Table (In.)
Spindle Distance to Table (Max.) (In.)
Base Size (In.)	14 x 16
Motor Current (Amps)	11, 5-1/2
Under Hold-Down (In.)
Table Travel - Longitudinal (In.)	15-1/2
Stand Height (In.)
Table Size (L x W) (In.)	7 x 20-1/4
Chisel Shank Capacity (In.)	5/8, 3/4, 1-1/8
Wiring Remarks
Style (Type)	Tilt Table