Navigate to the www.acetool.com homepage

Same-Day Shipping
On in stock items if order is placed before 3pm est

    Powermatic 1791293 OES9138 Sander, 3HP

    Powermatic 1791293 OES9138 Sander, 3HP

    Powermatic
    $0.00
    Items shipped directly from the manufacturer may be subject to a fee. Please call 877-783-8899 for details.
    Choose your options:
    JPW Drop Ship Policy
    Freight Policy(required):
    Product Code: JET-1791293
    Usually Ships in 7-10 Days
    Stock Status:  BackOrder

    Powermatic 1791293 OES9138 Sander, 3HP

    The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 deg and out to positive 45 deg. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.

    • Large radius end table has 6" vertical travel and 45 deg tilt for any angle and working height needed
    • Spring loaded, quick release lever makes belt changes quick and easy
    • Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
    • Large 11-3/4" x 48" front worktable with 8" vertical travel and 45 deg tilt, includes miter head for angle work
    • Oscillates 24 cycles per minute for better finish and longer belt life
    • Dual dust collection ports keep work area clean and extend abrasive belt life
    • Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
    • Heavy-duty oscillating gearbox and shaft for long maintenance-free use
    • Hinged guard opens for infinite length sanding
    • Style (Type)Horizontal/Vertical Oscillating Edge
    • Sanding Belt Size (L x W) (In.)9 x 138-3/4
    • Belt Speed (FPM)3542
    • Drum Diameter (In.)4 Outboard, 9 Drive
    • Platen Size (In.)9-1/2 x 48
    • Oscillations Per Minute24
    • Main Table Size (L x W) (In.)48 x 11-3/4
    • Main Table Tilt (Deg.)5 In, 45 Out
    • Table Height from Floor (In.)34-1/2 - 40-3/4
    • End Table Size (In.)18
    • End Table Tilt (Deg.)40 In, 45 Out
    • Electrical ControlsMagnetic Starter
    • Dust Collection Minimum CFM Required (CFM)1,100
    • Dust Port Outside Diameter (In.)4
    • Motor Power (HP)3
    • Motor Phase3
    • Motor Voltage (V.)230/460
    • Prewired Voltage (V.)230
    • Recommended Circuit Size (Amps.)15/10
    (1) Powermatic 1791293 OES9138 Sander, 3HP

    STAY CONNECTED fbxig