Your shop may look clean, but how clean is the air? The PM1200 Air Filtration System traps up to 99% of all 5-micron particles and 85% of all 1-micron particles for a healthier work environment. Three blower speeds modify air flow. The unit can be operated either at the cabinet or with the remote transmitter which uses radio-frequency, eliminating the need for line-of-sight operation. The timer has nine settings, allowing continuous operation for up to 9 hours while you?re away, and will shut off at the end of that period. The filter guards can be removed and installed without tools, for instant filter access.

• Two-filter system traps particles as small as 1 micron
• Remote control operates on radio frequency for wider range of effectiveness
• Timer has nine settings, for up to nine hours of continuous operation
• Inner filter has fine mesh pockets for high efficiency, can be blown clean
• Electrostatic outer filter is disposable
• Diffusion filter disperses exhausted air
• Four eye bolts allow suspension from shop ceiling
• Indicator lights up after 200 hours to remind user to replace filters
• Three blower speeds to modify air flow
• Filter guards install and remove easily without tools for quick access to filters

Inner Filter Efficiency (%)	85
Motor Power (HP)	1/4
Recommended Circuit Size (Amps.)
Speeds	547, 706, 1,196
Prewired Voltage (V.)
Wiring Remarks
Motor Current (Amps)	3-1/2
Motor Voltage (V.)	115
Timer Settings	1/9/2012
Cycles per Minute (20' x 20' x 8')