Industrial Thin Stock Non-Ferrous Metal Blades

Cutting Thin Aluminum And Other Non-Ferrous Metals

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5-degree hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

- Positive Hook Angles produce a smoother cut with less material distortion and burr free cuts

- Freud-Made TiCo Carbide specifically designed to cut non-ferrous metals extends tooth life and withstands impact

To determine if the metal you wish to cut is non-ferrous, hold the metal next to a magnet. If it attracts the magnet, it is a ferrous metal and should not be cut with a non-ferrous blade.

Freud Silver Ice Blade: LU90M010

Diameter: 10 Inches

Arbor: 5/8 Inches

Kerf: 0.11

Plate: 0.087

Hook Angle: 5 Degree Hook