Klein Tools 1628-16AT Chicago Grip - Bell-System Type Grip
$1,121.42
Klein 1628-16AT Chicago Grip - Bell-System Type Grip-Wire Pulling GripsChicago Grips - Bell-System Type Grips; Steel Strand Wire Pulling Grips
Klein Tools 1628-16AT Chicago Grip - Bell-System Type Grip Features:
- 1628-16AT is identical to Bell-System type ''H'' strand puller.
- Equipped with chain, toggle and shackle.
- For support wire .134 and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
| Maximum Safe Load - lbs | 15,000 lbs (6804 kg) |
| Maximum Cable | .62'' |
| Jaw Length | 7-1/4'' (184 mm) |
| Maximum Safe Load - kg | 6818 kg |
| Minimum Cable | .31'' |
| Approx. Weight Each | 15.80 lbs. (7.2 kg) |
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
Recently Viewed