Higher output as optimum grinding parameters can be maintained over time. More grinding hours per day since you can operate and prepare next steps simultaneously. For example you can apply GM 3000 with a broom at the same time as you run the machine.
Replication of manual grinding movements (oscillation), gives best possible grinding pattern by adjusting amplitude and frequency. Gives a flatter floor by eliminating so called ridges otherwise created between passes.
Dual Drive Technology fully independent control of both planetary and satellite grinding heads in regards to speed and direction of rotation.
Parameter settings enables optimum grinding and polishing for each application. Consistent operation and result, even when changing operator.
Rated input power: 17.5 hp
Rated current: 23 A
Voltage: 380-480 V
Phases: 3 ph
Pins: 3-pin
Frequency: 60 Hz
Grinding width: 27 in
Grinding disc diameter: 9 in
Grinding disc speed min: 300 rpm
Grinding disc speed max: 1200 rpm
Grinding pressure, max: 606 lbs
Planetary head speed max: 5-65 rpm
Direction of rotation: Independent FWD/REV direction control on both grinding discs and planetary head.