Klein Tools 1656-40H Chicago Grip - with Hot-Line Latch for Bare Conductors
$493.29
Klein 1656-40H Chicago Grip - with Hot-Line Latch for Bare Conductors-Wire Pulling GripsChicago Grips - with Hot-Line Latch for Bare Conductors
Klein Tools 1656-40H Chicago Grip - with Hot-Line Latch for Bare Conductors Features:
- Hot-line grips for both bare and insulated conductors.
- Grip may be placed on wire with hot-line stick.
- When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
- Standard hot-line grips are not supplied with springs or lock-open features.
- When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example: S1684-5H).
| Jaw Length | 5-1/2'' (140 mm) |
| Minimum Cable | .53'' |
| Maximum Safe Load - kg | 3629 kg |
| Approx. Weight Each | 8.50 lbs. (3.9 kg) |
| Maximum Safe Load - lbs | 8000 lbs. (3629 kg) |
| Maximum Cable | 336,400 CM ACSR .74'' |
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
Recently Viewed