Klein Tools 1692-5AT Chicago Grip - Bell-System Type Grip
$723.79
Klein 1692-5AT Chicago Grip - Bell-System Type Grip-Wire Pulling GripsChicago Grips - Bell-System Type Grips; Steel Strand Wire Pulling Grips
Klein Tools 1692-5AT Chicago Grip - Bell-System Type Grip Features:
- Equipped with chain, toggle and shackle.
- For support wire .134 and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
| Approx. Weight Each | 6.60 lbs. (3 kg) |
| Maximum Cable | .55'' |
| Minimum Cable | .218'' |
| Maximum Safe Load - lbs | 8000 lbs. (3629 kg) |
| Maximum Safe Load - kg | 3636 kg |
| Jaw Length | 5'' (127 mm) |
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
Recently Viewed