The NR1890DCQ4 18V Cordless Paper Strip Framing Nailer (Tool Body Only) completely raises the bar for cordless framing nailers. It is designed so you no longer need the dirty hoses, loud compressors or expensive gas cartridges. It's equipped with Metabo HPT's unique Air Spring Drive System that delivers similar performance as a pneumatic nailer, but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp up time, up to 2 nails driven per second, recoil that feels like a pneumatic nailer and best of all, there is no refilling of the air tank required. This cordless nailer is ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite for quick in-and-out operation with minimal hassle and professional results.
- Covered by Metabo HPT's Lifetime Lithium Ion tool warranty
- Same Tools, New Name. Metabo HPT is the new brand name for Koki Holdings America-formerly part of the Hitachi Group.
- Tool body compatible with Metabo HPT's 18V Lithium Ion slide type battery and 36V MultiVolt battery (sold separately)
- Unique Air Spring Drive System that uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives
- Brushless motor for longer run time per charge, less maintenance and increased durability
- Powered by a Compact 3.0Ah Lithium Ion battery that is 3/4" shorter and .6 lbs lighter than a conventional 3.0Ah battery for complete portability (sold separately)
- Drives up to 400 nails per charge using the compact 3.0Ah battery
- Tool-less depth of drive adjustment for a professional finish with varying materials
- Power switch located on control panel must be depressed for 1 second to activate the nailer and automatically switches off after 30 minutes of inactivity for added safety
- Selective actuation on the control panel transitions between sequential mode and bump fire mode, when rapid nailing is preferred
- Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime
- Ergonomically formed soft grip handle provides comfort and ensures a secure hold
- Dry fire lock out system prevents nailer from driving when fasteners are low for added safety
- Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use
- Pivoting rafter hook for easy storage when nailer is not needed
- 30 deg magazine holds approximately 47 paper strip collated fasteners from 2" up to 3-1/2" in length
- High & stable driving power allows the nailer to drive 3-1/2 nails into even the toughest of engineered lumber with ease
- Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing
- Freedom from cumbersome air hose and compressor saves time in setup, during applications and in jobsite clean up
- No refilling of compressed air tank required for low maintenance and long lasting durability
- Easily serviceable by your local Metabo HPT Authorized Service Center
- 10.6 lbs and well balanced for easy maneuverability
