Navigate to the www.acetool.com homepage

Same-Day Shipping
On in stock items if order is placed before 3pm est

    Powermatic 1791267 201HH 201HH, 22" Planer, 7.5HP 1PH 230V, helical cutterhead

    Powermatic 1791267 201Hh Planer 7.5Hp 1Ph 230V

    Powermatic
    $0.00
    Items shipped directly from the manufacturer may be subject to a fee. Please call 877-783-8899 for details.
    Choose your options:
    JPW Drop Ship Policy
    Freight Policy(required):
    Product Code: JET-1791267
    Usually Ships in 7-10 Days
    Stock Status:  BackOrder

    Powermatic 1791267 201Hh Planer 7.5Hp 1Ph 230V

    This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5? dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 150 four sided knife inserts ? these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements.
    • Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
    • Cast iron 1300 lb. construction for solid performance without vibration
    • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
    • Segmented infeed roller with sectional chipbreaker allows multiple board planing
    • Roller bearing-mounted feed rollers for long life
    • Adjustable bed rollers allow smooth feeding of rough or finished workpieces
    • Oversized cast iron table travels on 2 large lead screws for heavy duty support
    • Dust chute with 5" port for dust collection
    • Standard Equipment:
    • Dust collection port
    Motor Current (Amps)
    Table Support2 Column
    Knife Size (L x W x T)
    Infeed Roller Diameter (In.)3
    Bed Rollers Adjustable from Front2
    Number of Speeds2
    Digital Readout
    Number of Rollers
    Column Diameter (In.)2-1/2
    Segmented Infeed Roller Diameter (In.)3
    Maximum Full Width Depth of Cut (In.)
    Minimum Planing Length (In.)10
    Table Size (L x W) (In.)32-1/4 x 24
    Dust Port Outside Diameter (In.)5
    Outfeed Roller Diameter (In.)3
    Prewired Voltage (V.)
    Style (Type)Planer
    Outfeed Table Length (In.)
    Movement - Horizontal (In.)
    Cutterhead Diameter (In.)3-1/4
    Range of Speeds
    Feed Rate (FPM)20, 30
    Cuts Per Minute
    Type of Cutterhead
    Table Size with Extensions (L x W) (In.)
    Maximum Depth of Cut (In.)3/16
    Movement - Vertical (In.)
    Maximum Planing Width (In.)22
    Dust Collection Minimum CFM Required (CFM)900
    Maximum Height of Rollers Parallel to Tabletop (In.)0.05
    Table Height from Floor (In.)
    Motor Voltage (V.)230
    Recommended Circuit Size (Amps.)
    Number of Knives150 Four-Sided Inserts
    Reversible
    Wiring Remarks
    Motor Power (HP)7-1/2
    Maximum Planing Thickness (In.)9-1/4
    Cutterhead Speed (RPM)4,800
    Distance Between Rollers - Center to Center (In.)

    STAY CONNECTED fbxig