SawStop Total Safety
We didnt stop at our patented safety system.
The SawStop Professional Cabinet Saw has several other features to help operators stay safe.
- SawStop safety system prevents serious injury with always-on protection.
- Its better when the guard stays on. The low profile blade guard can be used even on narrow cuts, which means you can take advantage of the added protection of the blade guard, even on cuts as narrow as 3/4 of an inch.
- Riving knife minimizes kickback and provides protection during non-through cuts.
- Keep dust where it should be " out of your lungs. The blade is well shrouded to improve dust collection and reduce airborne particulates. The shroud tapers to a 4 port for direct connection to a dust collection system. When properly connected, the Contractor Saw boasts more effective dust collection than many hybrid table saws.
- No rough edges. The zero-clearance insert supports the wood throughout the cut and reduces tear-out and chip-out.
- We double-check the saw every time you turn it on. A diagnostic self-check runs
- continuously when you start the saw to ensure all systems are ready to detect an accident.
- Sometimes you have your hands full and really need to turn off the saw. Our large start/stop paddle with hands-free shutoff can be stopped with your knee allowing you to safely stop the blade even when both hands are busy. The paddle is located on the left side of the saw to minimize accidental shut off.
- Never worry again about someone using your saw when youre not around. The main power switch with lockout key prevents unauthorized users from operating the saw.
- When the power goes out, the saw stays off. The safety system wont allow the motor to restart automatically when the power comes back on.
- Left-tilting blade helps prevent wood from binding against the fence.
SawStop Convenience
We worked hard to make the SawStop Contractor Saw as easy to use as possible.
- The right saw for you. With a variety of options, including 30, 36 and 52 fence systems, you can configure your table saw to exactly meet your needs whether youre in a shop or on the job site.
- Two mobility options make it easy to move the Contractor Saw. A job site cart allows for movement over uneven terrain, while the mobile base makes it possible to move your saw around a shop. Both options provide a sturdy base when the saw is in use.
- Assembly/Out of box " Quick Start guide, manual and installation instructions " a joy to assemble. See video 1/2
- Inconvenience is the enemy of safety. We made it easy to change between blade guard and riving knife with our tool-free blade guard quick change mechanism. Operators can change make changes quickly with no tools required, minimizing disruptions to workflow. See video 1/2
- Measure once, cut once. Getting the right measurement is easy with magnified indicator lenses and smooth sliding surfaces on the T-Glide Professional Series Fence.
- Cut anything " even conductive material. The safety bypass switch allows users to cut conductive material without activating the brake. Since the bypass has to be turned on every time the blade is started, you dont have to remember to turn off the bypass system when youre done.
SawStop Fit & Finish
Many of our customers tell us that they bought the saw for its safety features, but fell in love with its quality.
- Flawless out of the box. Each saw is inspected and adjusted until it meets our stringent quality standards before it leaves the manufacturing floor. Our 150-point inspection assures that your saw arrives to you properly aligned and ready for use.
- Stable and solid. Youll find considerably more cast iron in the SawStop Contractor Saw, resulting in reduced vibration.
- True vertical alignment. Our elevation system operates on a vertical slide rather than on an arc providing you with repeatability and consistent alignment. Blade height is proportional to handle turns at all elevations.
- Get working fast. Our quick start guide and color-coded, easy-to-follow assembly instructions get you up and running fast.
- No more rocking the fence. Our widely spaced glide plates and adjustable rail provide smooth travel up and down the extension table.
SawStop Durability
No one has ever accused us of cutting corners.
- With a 1.75 HP motor, the Contractor Saw delivers the power you need in a compact package.
- Engineered for the automotive industry, the long-lasting Poly-V ribbed belt can run continuously while delivering greater power transfer to the blade for better cuts.
- Powder-coated cabinet resists rust and corrosion ensuring stability and reliability
- for years to come.
- Massive 62mm main arbor bearing delivers long lasting performance. No one has a bearing nearly this big, providing you with smoother performance and longer life.
